93NG Ledbar - estate - Saab griffin look - DIY version
This is the DIY ledbar page this page will soon change to a more easy read format.
Shipping to outside EU temporarily unavailable till we find a UPS-proof shipping solution.
Follow the following installation video's to install your ledbar. If you do not watch the videos you will not be able to propperly install your ledbar.
DIY ledbar installation guide:
https://www.youtube.com/watch?v=k-73VL0-Fvs
A video for alignment 1/2:
https://youtube.com/shorts/MTwxjIIMDV8
A video for on car alignment 2/2:
https://www.youtube.com/watch?v=SgFCruUYX3g
A video for license plate light hub modification:
IF UPS messes up shipping this video helps out (this can and has happened for real):
https://m.youtube.com/shorts/MTwxjIIMDV8
The product contains the following:
1x ledbar 93NG estate glas + options of choice.
2x tiewrap for tieing the wires together.
4x side mounting clips (2 spares).
2x license plate lights (required to install if you want your lightbar to function.
1x darkening strip (to cover up the license plate lights light)
Keep in mind that this is the DIY version that is mounted on your own license plate light hub. Follow the video instructions for additional help.
Product information:
The Saab 93NG estate ledbar. This is a product developed by KM-tronics. That works based on the license plate light hub of your Saab 93NG estate. This ledbar can be wired into the original license plate light hub.
This version of the ledbar is for those who want to install the ledbar themselves. there will also come a mail in version, where we (KM-tronics) install the ledbar for you on your license plate light hub (at a premium cost.)
The 93NG estate ledbar is a mixture product of resin products and plexiglas products. There are 2 different light outputs available. "normal" - this version is difficult to see during the day, but shines bright at night. There is also the "bright" version, which is roughly the same in output as the rear lights. The "bright version will be available some time in the future. The "normal" version can output wise at night be found in this short video:
https://www.youtube.com/watch?v=WiTG8hEl0xI
The clear glas option will soon be available for purchase. We're currently making several so that we're able to meet demand when it becomes available somewhere in March 2026.
The total installation time for this job is roughly 1 hour and 15 minutes upward to 2 hours and 45 minutes. * depending on your skill level with certain tools.
The installation time of the ledbar to the license plate light hub takes roughly 30 minutes up to 1.5 hours depending on your skill level. No soldering is required but you do need to have the following tools at your disposal:
- Cutting tool (to trim the license plate light hub).
- Pliers (to attach the sliding clips and to tear off some parts of the license plate light hub)
- Construction kit (we advice Sikaflex 552 RTV kit for this, needed to glue your ledbar to the license plate light hub).
- scissors ( to cut and trim some wires ).
Afterwards you need to install this item to the car which will take up roughly 45 minutes to 1 hour and 15 minutes
Disclaimer:
This item is for off-road use only, check wether or not this is legal in your country for on-road use.
This is an aftermarket item not build by SAAB AB, SCANIA AB.
This item can deform( sag or slightly curve ) when the outdoor temperature exceeds 45 degrees celsius(112 fahrenheit), keep this in mind when purchasing this item. If you live in areas where the temperature is higher than this please notify us for a possible solution. It is also adviceable not to park your car with the ledbar aimed towards the sun on days where the outside temperature exceeds 35 degrees celsius(98 fahrenheit.
You maybe able to hear a high pitched note while driving around with the ledbar on speeds below 80km/h depending on how well sound isolated your car is.
Some small impurities in the glas may be visible they if they are no larger than 2mm in size and do not impede the visual effect of the ledbar these are unfortunatly acceptable till we later improve upon it.
On hot days alignment might need to be redone (if you order the aluminum alignment strips this wont happen). You can order these strips here:
https://www.kmtronics.nl/product/22240463/saab-93ng-ledbar-estate-alignment-strips
Warranty:
- In case of a broken ledbar due to shipping inform us within 48 hours of arrival of your ledbar. Unpack this immidiatly and inspect it for cracks or tears. Warranty for this is voided if these defects are not mentioned to us via mail within 48H.
- In case of none functional items suchs as led's not functional inform us within 6 months of purchase. If its mentioned after these 6 months a surcharge for new LED strips will be charged. ( If for some reason you're unable to install the ledbar to your car within 6 months of arrival test the working via the connector on your car ).
- In case of missing items, such as license plate lights, tie-wraps, terminals or other installation requirements please inform us immidiatly upon arrival of the package