93NG Ledbar

Updated
€135.00

Product photo's and more information and installation guides will follow soon. The page is being reworked to accomedate all chassis forms.

Saab 9-3NG LED Bar

A new look for the Saab 9-3NG, developed and manufactured by KM-tronics.

Over the past months up to a year by now, we've been working on developing our own LED bar for the Saab 9-3NG. What started as an idea has gradually turned into a product that we're preparing to offer for all three body styles: Sedan, Convertible and Estate.

Rather than simply copying an existing design, we've developed several lighting options, allowing owners to choose the appearance that best suits their Saab.

Each LED bar is manufactured in-house using 3D printing and individually finished before shipping.

Available options

The LED bar will be available for the Sedan, Convertible and Estate, with two colour options:

  • Silver

  • Dark Titanium

There are also four different lighting designs to choose from:

  • Logo only

  • One large wing

  • Two small wings

  • Logo with two small wings

Please note that the availability of a particular design does not automatically include the reproduction of copyrighted or trademarked logos. Further information can be found in the disclaimer below.

Custom logos and designs

We can also accommodate custom logos and designs, although there are a few limitations worth mentioning.

Due to copyright and trademark restrictions, we can only manufacture LED bars incorporating logos or designs that are not protected by third-party intellectual property rights, or for which we have received the necessary authorisation.

Would you prefer to use your own logo?

No problem. We can leave a dedicated cut-out in the LED bar instead, allowing you to add and finish your preferred logo yourself afterwards.

This way, you can still personalise your LED bar without us having to reproduce protected designs without permission.

Materials and product characteristics

The LED bar is manufactured using a combination of PETG, resin and epoxy.

Because some these parts are 3D printed rather than injection moulded, there are a few characteristics worth mentioning.

Light diffusion and layer lines

Although we've spent quite some time improving the printing process, some layer lines will remain visible. These can create a slight holographic effect when the LED bar is illuminated.

The lighting effect is most noticeable when looking directly at the rear of the vehicle. From an angle of approximately 30–60 degrees, the illuminated design may appear less pronounced.

Surface finish and flexibility

You may also notice some minor waviness in the surface. This is partly related to the manufacturing process and the flexibility required for the LED bar to fit onto the original number plate lighting housing.

Temperature and humidity can influence the material slightly. In some cases, the waviness may become less noticeable over time, while in more humid environments it may remain visible.

We've made considerable progress in reducing these effects, but we prefer to explain these characteristics beforehand rather than pretend that a 3D-printed part is identical to an injection-moulded one.

Expected availability

We're introducing the different versions gradually. This gives us sufficient time to complete the remaining development work and prepare production.

Sedan

  • Orders open: 25 December 2026

  • Shipping starts: 30 January 2027

Convertible

  • Expected ordering date: 1 March 2027

  • Expected shipping date: 1 April 2027

Estate / SportCombi

  • Expected ordering date: 1 June 2027

  • Expected shipping date: 1 July 2027

Please keep in mind that these are estimated dates. As production is handled in-house, the schedule may change if additional development or testing is required.

Installation and additional information

We're still preparing the product photographs and installation instructions for the different body styles. These will be added to this page as each version approaches its release date.

In the meantime, you can register your email address using the stock notification option on this page. You'll automatically receive a notification when the product becomes available.

Disclaimer – Copyright & Trademark Protection

KM-tronics does not reproduce or incorporate the SAAB logo, or any other copyright-protected or trademarked logo, into its LED bars without prior written authorisation from the respective rights holder.

An exception can only be made when the customer provides official documentation explicitly authorising KM-tronics to reproduce and use the specified logo.

This authorisation must meet the following requirements:

  • It must be issued by the legitimate copyright or trademark holder, or an authorised representative.

  • It must explicitly identify KM-tronics as a party authorised to reproduce and incorporate the logo into its products.

  • It must clearly specify whether permission is granted for a single reproduction or for series production.

  • The authenticity of the documentation must be independently verifiable through official communication channels of the rights holder.

KM-tronics reserves the right to contact the rights holder directly to verify the authorisation and to refuse any request where sufficient proof cannot be provided or verified.

If such authorisation is unavailable, we can manufacture the LED bar with a dedicated cut-out instead. Customers may then arrange their own logo insert, subject to any applicable intellectual property rights.

The availability of a custom cut-out does not imply that KM-tronics grants permission to use any protected logo or design.

 


 

Developed and manufactured in the Netherlands by KM-tronics.